Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris

Stijn Lambrechts

Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris, at AM Factory Conference on December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

Sirris launched its AM Integrated Factory on November, 14th 2017. The presentation shows Sirris’ view on how 3Dprinting needs to be integrated on the shop floor. Continue reading “Sirris’ vision on AM Integrated Factory – Presented by Stijn Lambrechts, Sirris”

Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software

Omar Fergani

Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software B.V, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

The presentation will demonstrate how Siemens industrializes additive manufacturing; how we design and produce useful parts at scale.
The session will highlight the methodologies and the software tools that we use to turn next generation design ideas (in this case from Bugatti and Siemens Power and Gas) into commercial products. Continue reading “Industrializing Additive Manufacturing – Presented by Omar Fergani, Siemens Industry Software”

Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO

Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

Since its inception Additive Manufacturing (AM) has been the promise for a paradigm shift in production technology and processes. Moving from prototyping towards mass customization and printing on demand, the AM-process now needs to make a further leap. By continuous AM the productivity can be increased and as a result the cost for the production can be decreased.

Continue reading “Continuous AM for production – Presented by Jeroen Smeltink, AMSYSTEMS – TNO”

Scaling up 3D printing production with automated post-processing – Presented by Stefan Rink, AM-Flow

stefan rink

Scaling up 3D printing production with automated post-processing – Presented by Stefan Rink, CEO, AM-Flow, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

With increasing production volumes, the 3D printing supply-chain must adapt. Traditional supply-chain solutions are not always suitable, as 3D printing enables the cost-effective production of complex geometries in small batch-sizes (High Mix, High Volume).

Bottle-necks in scaling up production, are the identification, sorting, transport and packaging processes. These processes are currently done manually and the cost scale linearly with production capacity.

AM-Flow solves a critical step by fully automating these processes, by using proven methods from traditional manufacturing and advanced methods, such as machine vision.

AM-Flow enables the next step in industrial polymer 3D printing, towards lean six sigma en Quick Response Manufacturing. Continue reading “Scaling up 3D printing production with automated post-processing – Presented by Stefan Rink, AM-Flow”

Using Data to Drive Additive Efficiency, Quality and Transparency – Presented by Andre Wegner, Authentise

Andre Wegner

Using Data to Drive Additive Efficiency, Quality and Transparency – Presented by Andre Wegner, Authentise, at the AM Integrated Factory Conference, December 4, 2018, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

Not only is additive manufacturing not nearly as encumbered by legacy processes as other manufacturing technologies, it’s also a digital process through and through – yet we are not taking advantage of these opportunities to reduce cost and increase repeatability. There are still low hanging fruit, in addition to more complex initiatives we can take to turbocharge additive with data – from simple steps such as updating order status based on activity to more complex deployments of machine learning to aid quotes, nesting, and quality assessment. Authentise will demonstrate how it uses data from a variety of additive machines– including EOS, SLM, HP, Rennishaw, Carbon– to go beyond dashboards and improve operations whether you’re in production, prototyping or R&D. Continue reading “Using Data to Drive Additive Efficiency, Quality and Transparency – Presented by Andre Wegner, Authentise”

CECIMO is Content Partner of AM Integrated Factory Conference

cecimo

CECIMO is Content Partner of AM Integrated Factory Conference

About CECIMO
CECIMO is the European association for the Additive Manufacturing (AM) industry. We represent 15 national associations for AM technology all over Europe. Through all of its member countries across the continent, CECIMO represents 350 leading AM companies across the B2B and B2C spaces. These companies are active in a variety of critical segments in the AM value chain: from the supply of all different types of raw materials for additive manufacturing and the development of software, to machine manufacturing and post-processing. Continue reading “CECIMO is Content Partner of AM Integrated Factory Conference”

AM Integrated Factory Conference welcomes Flam3D as Content Partner

Flam3D

AM Integrated Factory Conference welcomes Flam3D as Content Partner

About Flam3D
Flam3D is the independent not-for-profit platform for all stakeholders active in the domain of 3D-printing. We unite, represent and support companies, research institutions, governments and stakeholders. Over 80 companies and research institutes are member of our association.

Flam3D is looking to strengthen value chains, both inside and outside the organization. We are open for companies and organizations interested in 3D-printing and Additive Manufacturing applications. Within our network, we will always find relevant contacts to help you with your 3D challenge. Continue reading “AM Integrated Factory Conference welcomes Flam3D as Content Partner”

ExportHub is media partner of AM Integrated Factory Conference

exporthub

ExportHub is media partner of AM Integrated Factory Conference

About ExportHub
ExportHub is an international B2B marketplace brand formed by a group of B2b & Internet marketing experts, who have spent their lifetime in pursuit of technology projects. People at ExportHub have prior internet marketing experience and are thorough with industry related knowledge.
Combining our strong B2B experience, technology expertise and profound knowledge of current industry trends, ExportHub offers innovative solutions to your business problems.

Unlike other B2B’s, ExportHub offers guaranteed result oriented services that differentiate us from the other B2B & Internet marketing industry. Over the last decade, ways to do business has changed multi-folds. To unleash your maximum business potential, we offer high-tech B2B and full-scale digital services. Continue reading “ExportHub is media partner of AM Integrated Factory Conference”

AM Integrated Factory Conference welcomes Sirris as Content Partner

sirris

AM Integrated Factory Conference welcomes Sirris as Content Partner

About Sirris
Sirris, the collective centre of the Belgian technology industry, helps companies to introduce technological innovation enabling them to strengthen their competitive position. Every year, the 120 Sirris experts help about 1800 companies to implement technological innovations by researching new technologies, raising industry awareness of promising innovations, and providing advice at all decision-making levels and support from the initial concept to the operational solution. The organization’s tailor-made services can range from a few hours’ consulting to research projects spanning months or years. Founded in 1949 under the name WTCM-CRIF by Agoria, the Belgian Federation for the Technology Industry, the mission of Sirris has remained unchanged: increase the sector’s competitiveness through technology and innovation. Continue reading “AM Integrated Factory Conference welcomes Sirris as Content Partner”